Phoenix

Category: Cow Mattresses

Providing Cow Comfort & Increasing Productivity

EASYFIX Phoenix is a cubicle mattress offering a superior level of cow comfort. The natural resting position of the cow is supported by the soft lying area within the mat.

The cubicle mattress has a 25mm layer of latex foam is interlocking on two sides with a sloped profile at the rear edge.

Benefits

Features

Technical Data

FAQs

Resources

Benefits
Features
Technical Data
FAQs
Resources

Enhances Cow Comfort & Welfare

By encouraging a comfortable lying position for cows in the cubicle bed. Cows can stretch their front legs for maximum comfort.

Increases productivity

Increased lying times = higher milk yields. Research shows that cows can lie for up to 14 hours a day. Therefore, the more comfortable you make the cows environment, the longer they will lie.

Easy to install

Our cow mattresses are suitable for DIY Installation & all cubicle sizes

Features

Natural rubber compound
Interlocking on two sides
500 micron sealed wrapper enclosing 25mm latex foam
Foam 50% latex and 50% PU
Sloped profile at the rear

Dimensions

Width: 1125mm
Length: 1750mm
Height: 37mm

Warranty

10 years

Application

Cow mats, cow mattress, cubicle mats, free stall cow mats

Why buy a mattress over a cheaper rubber mat?

Cows can lie for up to 14 hours per day – the more comfortable you make the cubicle the longer they will lie. Cows produce 5 times more milk lying down versus standing.

What makes the EASYFIX Phoenix mattress a top-level mattress choice?

Top Cover – Top-skin thickness is a very important aspect of a mattress. The EASYFIX Phoenix mattress has a top-skin thickness of a minimum 10mm. Most continuous mattress roll systems have a top-skin thickness of between 3mm to 6mm.
Foam Mattress – Not only has the Phoenix a thicker top-skin thickness than most competing mats, it also has a 25mm mattress underneath. The mattress consists of 50% latex and 50% polyurethane and is encased in a 500-micron sealed wrapper which prevents moisture from seeping in. Tests conclude that our latex is certified to only lose 2% elasticity over a 10-year period. Competitors, if they know, will typically use 80:20 latex/polyurethane split as this is a cheaper option and the memory and elasticity of the latex will deteriorate over a shorter period of time.
Interlocking System – The Phoenix mattress has a secret interlock on it which seals the joint and prevents any bedding or moisture getting into the joint.

Does the mattress prevent hock damage?

EASYFIX have designed a top-surface finish to the mattress which provides a good level of grip but that is also non-abrasive to cows’ hocks. This is the opposite to canvas type mattress surfaces that can cause hock damage which has implications for herd health and in particular fertility.

How can I test for comfort?

The EASYFIX Phoenix mattress has a DLG deflection reading of 22mm (0.86”). Cows typically transfer 70% of their bodyweight to their two front knees and free fall 18-24” to the mattress. To get an idea of the cushioning effect cows enjoy on our Phoenix mattress you can do the simple ‘knee test’ to test for comfort. Simply drop to your knees onto the mattress top and observe the deflection of the mat around the impacted area.

How do you clean the mattress?

The Phoenix has a smooth and sloped 6 inches at the rear of the mattress which aids run-off and for ease of cleaning. Additionally, hand-scrapers, brushes or mechanically propelled cubicle bedders can be used.

Can you use lime or other absorbent material with them?

It is recommended with all cubicle mat or mattress systems to use a bedding material such as saw dust or lime. This will absorb any liquid run off, ensure beds remain dry and material with antibacterial agents or lime will ensure bacteria growth is lowered and therefore keep SCC low, and prevent mastitis.