EASYFIX DLG Certification

EasyFixTM Slat Rubber System

Short Description

  • black profiled slat rubber mats 18 to 22 mm thickness, with rippled wedges/studs underneath (height approx. 50 mm, length approx. 45 mm, width approx. 35 mm);
  • with integrated sloping profile on the surface (height of the middle of the surface is 22 mmand at the gap 18 mm);
  • surface with a diamond-shaped pattern;
  • bottom side without any profile;
  • fitted as single mats.


Agri & Industrial Rubber
T/A EasyFix™ Rubber Products
Raford, Killtulla
Co. Galway
Telephone: 00353(0)91 848770
Fax:             00353(0)91 848771
Email: online@easyfix.com
Internet : www.easyfix.com

German Agricultural-
Society e.V. (incorporated society)
DLG Test Centre
Technology & farm operating resources

Assessment – Summarised

Test CriterionsTest ResultAssessment Value
Suitabilitysuitable as contact single or double slat surface for cattle stables
Resistance to wear and teardurability and ageing (test stand trials)
abrasion testgood wear resistance+
continuous tread loadno lasting deformation++
surfaceno appreciable wear+
bottom sideno appreciable wear+
acid testno alterations to the surface+
Measurements adherenceno noteworthy changes in length or width+
Handling, laying
D.I.Y. layingsimple+
fixationstable and reliable+
installation instructionsshort and comprehensibleo
Surface cleanability
stepping surfaceso
cleaningno problems+
high pressure cleaner10 cm minimum clearance when using a flat jet nozzle+
30 cm clearance when using a rotary dirt turbo nozzle+
warranty and recycling5 years with linear depreciation
mats are taken back by manufacturer+
Behavioural observations
movement behaviourincreased activity+
comfort and heat behaviourpronounced+
Slip resistance
slip resistance during slide pulling testsgood+
Claw appraisal
mechanical-traumatical findingspositive influence+
shape of the hoof wallstanding over in more than 50% of claws+
Deformability and elasticity
in new state2.25 mm, good+
after continuous tread load2.20 mm, good+
Toxicological innocuousness
certified by the manufacturero
Evaluation range: ++/+/ o /-/– (o= standard)